MOBITEK Q25 4G Modem Can Use IP Address instead of COM Port Number

TEST OBJECTIVE TESTING METHODOLOGY TEST RESULT
Can hyper terminal connect to MOBITEK Q25 4G Modem via IP address instead of COM port and run “hyper terminal test“?
  1. Connect MOBITEK Q25 4G Modem  to LAN via LAN port.
  2. Assign IP address to Q25 using USR-TCP232 to be in the same subnet of the LAN. For this example:
    • the gateway is “192.168.10.1”
    • set the IP address for Q25 in this subnet “192.168.10.???”
    • Get the “Module port” of Q25 in USR-TCP232
  3. Run hyper terminal and connect using “TCP/IP (Winsock)”.
  4. Enter the “Host address” and “Port number”
  5. Type “AT” to Hyper Terminal to see if Q25 is responding
  • 860147050425139
  • 860147050425154