- The default connection for MOBITEK EC20 router is 4G network. It will try to connect to 3G and 2G if the 4G network is unavailable:-
- MOBITEK EC20 can be configure to use different type of mobile network:-
- The preferred network that MOBITEK EC20 will connect to can be configured, here it 4G (LTE) preferred over 3G (UMTS), and preferred over 2G (GSM) :-
- The “4G signal” below indicates that the MOBITEK EC20 router is connected to 4G network with 5 bars to determine the signal strength.
- Alternatively, you can check which network MOBITEK EC20 router currently connected to, go to “Administration” -> click on “Console” tab, type “atcmd at+qnwinfo” (all small letters):-
- first parameter is for “access technology selected”
- for 4G, it can be:
- FDD LTE
- TDD LTE
- for 3G, it can be:
- TDSCDMA
- HSPA+
- HSUPA
- HSDPA
- WCDMA
- for 2G, it can be:
- EDGE
- GPRS
- GSM
- for 4G, it can be:
- the second parameter, “50219”, is the network operator (TELCO) (you can ignore this)
- the third parameter is, “LTE Band 1”, the type of frequency/band selected (you can ignore this)
- the forth parameter, 375, is for “Channel ID” (you can ignore this)
- first parameter is for “access technology selected”